Got the fiberglass rudder fairing Hysol'd on to the rudder before having to leave for a week for work. Came home and was able to do some final trimming on the fairing so that it fit on the vertical stab with with no interference in it's movement. One thing I did before gluing the fairing to the rudder was go back and make it so that the bolts through the vertical stab bearings went in without having to tweak the rudder some. That was time well spent since once you secure the fairing to the rudder and then install it on the vertical stab, it's harder to get the bolts in cause you have to go through the access holes in the fairing. Having it fitted with a good alignment made it much easier.
Earlier I had done some rough cutting out of balsa for the top caps on the vertical stab and rudder but when I looked at them again, I didn't like the way they looked. So I made a new set, did some rough shaping and then Hysol'd them. Tomorrow I should be able to do work on dialing in the shape and possibly start the Hysol coating.